Iron/ Stainless Steel/ aluminum/ copper CNC cutting machine
|Tipo de Pago:||L/C,T/T,D/P,Money Gram,Western Union|
|Terms of Trade:||FOB,CIF|
|Cantidad de pedido mínima:||1 Set/Sets|
|Plazo de entrega:||7 días|
|Paquete:||Packed with plywood case|
|Lugar de origen:||Jinan, Shandong Province, China|
|Capacidad de suministro:||100 sets/month|
Descripción del producto
Iron/ Stainless Steel/ aluminum/ copper CNC cutting machine
Working area: 1200*1200mm, 1300*2500mm, 1500*3000mm, 2000*4000mm etc.
Plasma power: Huayuan 63A, 100A, 120A, 160A, 200A
Hypertherm 45A, 65A, 85A, 105A, 125A
1. The bed lathe is made of square steel, analyzed and designed with heavy duty structure, relieving stress, so the working table is more stable.
2. Working table is iron piece table, more suitable for plasma cutting.
3.Double linear bearing to drive the Y shaft, which improve speed and more stable, it can cut repeatedly.
4. High speed and efficiency, empty speed is up to 30000/min, for engraving wave plank, the speed can reach 20000mm/min.
5. Basic Structure: The basic structure for the machine steel, all the steels are processed by heating dealing, thus the steel for the machine more tenacity. With long years wok without being transformed. The Basic structure working table with more intensive steel tube.
6. Transmitting System:(Our factory use Eccentric Locking Collar+ Eccentric Gear)Eccentric Locking Collar+ Eccentric Gear(These parts are made and proceed by our factory, fully steel materials). This transmitting system parts with long years work, it can guarantee high precision and less machinery gap. Eccentric locking collar and synchronizing wheel, the more time, you use the machine, the working precision is downing less, but with upper gear unit(Gear Box), with long time work, its precision down much, and easy to be broken.
7.Gear unit(Gear Box) Transmitting: These kinds of transmitting system is made of aluminum materials, after long time running, it is easy to produce much gap that make the Y Axis 2 motors run in different position, finally reduce the machine working precision.
1) 1300*2500mm working area
2) Beijing STARFIRE control system 63A+Arc Height Controller
3) JMC stepper motor&driver
4) Gear rack and square rail guide transmission
5) Sawtooth table
6) Heavy duty machine body with 5mm thick square tube
7) FASTCAM software
8) Instruction of STARFIRE control system and FASTCAM software.
1) Servo motor&driver(any brnad)
2) Huayuan 63A, 100A, 120A, 160A, 200A; Hypertherm 45A, 65A, 85A, 105A, 125A
3) Water tank/Water table
4) Flat table
CNC plasma cutting machine applications:
It is widely used in the process of cutting metal plates in the machinery manufacturing industry, engineering industry, and metal fabrication and can cut mild steel, stainless steel, aluminum, copper and many kinds of non-ferrous metal.
CNC plasma cutting machine features:
- 1300*2500mm standard working area(can tailor made for you)
- START control system
- Huayuan 120A plasma generator(Optional: Hypertherm power supply)
- Cutting Material Collection Box with wheels, for easy take out products
- High-Quality cut performance, Fast cutting speed, high precision, and low cost.
- With firm and reasonable structure, the machine is easy to operate and durable for use.
- The cutting incision is thin and tidily and can avoid the second processing.
- High configurated CNC system, auto arc-striking, and stable performance.
- Working with computer and support G code and files of Uncanniest software (specialized in cutting metal material) (optional Fastcam software)
- It can cut metal plate of advertising 3D lighting letter and flute profile letter with high cutting precision. (USA power is optional)
CNC plasma cutting machine's pictures:
CNC plasma cutting machine advantages:
1. Cutting faster, more accurate control, the cutting surface is more smooth, no glitches, no black; cutting holes in high quality
2. Stability and reliability for light path system and control system
3. Humanizing design, convenient operation
4. High-performance price ratio, low operating cost >High cutting efficiency, and quality, no noisy. Small heat influence area, cutting seam smooth and no deformation, post-treatment is not needed
5. The machine adopts Beijing START plasma control system, standard high sensitivity arc voltage device 6. High precision stepper motor and driver, ensure the efficiency and accuracy, increasing the stability and reliability greatly
CNC plasma cutting machine's details:
CNC plasma cutting machine's description:
|Model||UT-1325P CNC Plasma cutting machine (Other models are optional)|
|Working size||1300x2500mm (4x8ft) (Other working sizes are optional)|
|Three axes repeat positioning accuracy||±0.05mm|
X, Y: Taiwan Hiwin high-precision, zero clearance increased linear guide+ rack
Z: the arc voltage control
|Max. cutting speed||15000mm/min|
Starfire plasma cutting system
Standard high sensitivity arc voltage device
|Instruction format||G code|
|Drive system||Stepper motor|
|Plasma power supply||Huayuan 63A/120A/160A/200A. Optional, USA Hypertherm, 45A/65A/85A/105A/125A|
PS, Working area, Plasma power, Power supply's brand, Machine color, all could be customized for you.
Some differences between Huayuan and Hypertherm power supply:
PS, if you're not sure which kind of plasma power is suitable for you, you can share the following information for me, I'll suggest you choose proper type.
1/ Which kind of metal materials you wanna cut?
2/ How about the cutting thickness?
CNC plasma cutting machine's samples:
Advertising signs, logo making, decorative products, production of advertising and avariety of metal materials.
For steel, Carbon Steel, Stainless steel, alloy steel, spring steel, copper plate, aluminium plate,gold, silver, Titanium and other metal plate and tube.
1. Outside package: Standard marine export plywood case.
2. Inner package: Three layers in total; EPE pearl cotton film+PE stretchy film.
Improved package, much more strong and environmental protection. We can also make package according to your requests.
Shipped in 15-30 working days after payment.
About Trade Terms, usually is FOB, CIF, DAP etc. We can delivery to your agency who in China directly, or to your destination port and home.
1. Whole machine with one year warranty, within one year, if there has parts broken, you can send back to us, then we'll send a new one to you.
2. Free training course at our plant or on line.
3. After the warranty period, we'll provide the consumable parts at an agency price when you need replacement.
4. 24 hours on line service each day, free technical support.
5. Before machine delivery, we'll install all parts and test machine for you. We'll take machine's working video and machine photos for you for checking, if confirmed there're no problem, then we'll delivery machine. And if dont dismantle the gantry (if working area more than 1325, then need dismantle machine gantry for putting it into container), after machine arrived, you just need connect plasma power supply, software etc, it's more easily for you. If you're worried, we can take a teaching video for you at that time. By the way, during the production of machine, we also can share the process with you.
6. As for training, firstly we'll take more teaching video for you, and we also can remote control, most important, if you need, we can provide our technicians for on-site training and on-site teaching. And if you wanna, welcome to visit us, you can operate and learn your machine by yourself.
7. After machine shipped, I'll prepare some documents, like B/L, Packing List, Commerical Invoice, Commerical Contract, CE certificate for helping you pick up your machine.
"///UTECH" is the new logo brand after the transformation of "Shandong U-May CNC Technology Co., Ltd.". "/// "aims to record the important strategic transformation of the company from ordinary business innovation to high-quality operation in the three years after its establishment; "U" is "U-May"'s homophonic characters; "TECH" means the CNC technology. At the same time, when the company was founded three years, the establishment of the Ministry of Foreign Trade, so "///UTECH" became the company's new logo, and the company's development philosophy "Smarter Solution, Better Tomorrow."
Machine design, color, configurations, etc, all could be customized for you.
UTECH also process CNC Router, Fiber Laser Cutting Machine, CO2/Fiber Laser Engraving&Marking Machine, if you have demand, welcome to contact me, I'll give you some suggestions for choosing a proper machine with good price.
If you've free time and wanna know more about our machine or factory, welcome to China, Shanghai, we'll attend the following exhibition.
Q: What`s the package?
A: We have 3 layers package. For the outside, we adopt the woodcraft case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by a thickening plastic bag for waterproof.
Q: Will the package damaged during transportation?
A: Our package is considerate all the damage factors and makes it be safe, and our shipping agent have full experienced in safe transportation. We have exported to 180 countries worldwide. So please don`t worry, you will receive the parcel in good condition.
Q: How to install and run the machine?
A: Our technician has installed the machine before shipping. For some small parts installation, we will send detail training video, user`s manual along with the machine. 95% of customers can learn by themselves.
Q: How can I do if the machine goes wrong?
A: If confronted with such problems, please contact us asap and do not try to fix the machine by yourself or someone else. We will respond within 24 hours as quick as we can to solve it for you.
Shandong U-May CNC Technology Co., Ltd.
Shandong U-MAY CNC Technology CO., LTD. Se especializa en la investigación, desarrollo, producción de CNC MACHINE. Nuestra marca "WIN" "UTECH" tiene una reputación considerable en los productos domésticos similares, que ha sido ampliamente utilizada en muebles de madera, publicidad, regalos artesanales, embalaje e impresión, logotipo, etc. Nuestros productos han sido exportados a muchos países y regiones como Europa, Rusia, Asia, África. Estamos comprometidos con la filosofía de gestión empresarial "Integridad, innovación constante, comunicación efectiva, servicios de calidad" y el objetivo de "Cliente de servicio técnico", pero también una gran atención al diseño, fabricación, instalación y ajuste del producto. Seguiremos haciendo todo lo posible para mantener un servicio profesional de una parada.
- Nombre de empresa: Shandong U-May CNC Technology Co., Ltd.
- Representante: Xin Li
- Producto / Servicio: Router Cnc , Máquina de corte por grabado láser , Cortadora de cuchillo oscilante , Cortadora láser de fibra , Máquina de corte por plasma , Máquina de marcado láser de fibra
- Capital (Million US $): 叁佰贰拾万元整
- Año de fundación: 2014
- Facturación Annual: US$1 Million - US$2.5 Million
- Porcentaje de exportación: 71% - 80%
- Volumen Total de Compras anual (Millones de dólares EE.UU.): US$2.5 Million - US$5 Million
- Número de Líneas de Producción: 5
- Número de empleados para investigación y desarrollo: 21 -30 People
- Número de empleados para control de calidad: 5 -10 People
- Servicio del OEM proporcionado: yes
- Tamaño de la fábrica (metros cuadrados): 1,000-3,000 square meters
- Ubicación de la fábrica: No. 6-8, Industry South Road, Licheng District, Jinan, Shandong, China (Mainland)
- Persona de Contacto: Ms. Sofia
- Número de Teléfono: 86-186-63716521
Premium Related Products